Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamashita, Kiyoto; Maki, Shota; Yokosuka, Kazuhiro; Fukui, Masahiro; Iemura, Keisuke
JAEA-Technology 2023-023, 97 Pages, 2024/03
JAEA-Technology-2023-023.pdf:8.21MB
The incinerator adopted to incineration room, Plutonium Waste Treatment Facility had been demonstrated since 2002 for developing technologies to reduce the volume of fire-resistant wastes such as vinyl chloride (represented by Polyvinyl chloride bags) and rubber gloves for Radio Isotope among radioactive solid wastes generated by the production of mixed oxide fuels. The incinerator, cooling tower, and processing pipes were replaced with a suspension period from 2018 to 2022, which fireproof materials on the inner wall of the incinerator was cracked and grown caused by hydrogen chloride generated when disposing of fire-resistant wastes. This facility consists of the waste feed process, the incineration process, the waste gas treatment process, and the ash removal process. We replaced the cooling tower in the waste gas treatment process from March 2020 to March 2021, and the incinerator in the incineration process from January 2021 to February 2022. In addition, samples were collected from the incinerator and the cooling tower during the removing and dismantling of the replaced devices, observed by Scanning Electron Microscope and X-ray microanalyzer, and analyzed by X-ray diffraction to investigate the corrosion and deterioration of them. This report describes the method of setting up the green house, the procedure for replacing them, and the results from analysis in corrosion and deterioration of the cooling tower and incinerator.
Tsuchiya, Harufumi; Toh, Yosuke; Ozu, Akira; Furutaka, Kazuyoshi; Kitatani, Fumito; Maeda, Makoto; Komeda, Masao
Journal of Nuclear Science and Technology, 60(11), p.1301 - 1312, 2023/11
Times Cited Count：1 Percentile：72.91(Nuclear Science & Technology)Furutaka, Kazuyoshi; Ozu, Akira; Toh, Yosuke
Nuclear Engineering and Technology, 55(11), p.4002 - 4018, 2023/11
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Center for Computational Science & e-Systems
JAEA-Evaluation 2023-001, 38 Pages, 2023/07
JAEA-Evaluation-2023-001.pdf:1.04MB
Research on advanced computational science for nuclear applications, based on "the plan to achieve the medium- and long-term goal of the Japan Atomic Energy Agency", has been performed by Center for Computational Science & e-Systems (CCSE), Japan Atomic Energy Agency. CCSE established a committee consisting of external experts and authorities which evaluates and advises toward the future research and development. This report summarizes the results of the R&D performed by CCSE in FY2022 (April 1st, 2022 - March 31st, 2023) and their evaluation by the committee.
inferred from muon studyKadono, Ryosuke*; Hiraishi, Masatoshi*; Okabe, Hirotaka*; Koda, Akihiro*; Ito, Takashi
Journal of Physics; Condensed Matter, 35(28), p.285503_1 - 285503_13, 2023/07
Times Cited Count：0 Percentile：0(Physics, Condensed Matter)Iyota, Muneyoshi*; Matsuda, Tomoki*; Sano, Tomokazu*; Shigeta, Masaya*; Shobu, Takahisa; Yumoto, Hirokatsu*; Koyama, Takahisa*; Yamazaki, Hiroshi*; Semba, Yasunori*; Ohashi, Haruhiko*; et al.
Journal of Manufacturing Processes, 94, p.424 - 434, 2023/05
Times Cited Count：3 Percentile：57.26(Engineering, Manufacturing)Rodriguez, D.; Rossi, F.
Proceedings of INMM & ESARDA Joint Annual Meeting 2023 (Internet), 9 Pages, 2023/05
Rodriguez, D.; Abbas, K.*; Bertolotti, D.*; Bonaldi, C.*; Fontana, C.*; Fujimoto, Masami*; Geerts, W.*; Koizumi, Mitsuo; Macias, M.*; Nonneman, S.*; et al.
Proceedings of INMM & ESARDA Joint Annual Meeting 2023 (Internet), 8 Pages, 2023/05
Nakamura, Jumpei*; Kawakita, Yukinobu; Okabe, Hirotaka*; Li, B.*; Shimomura, Koichiro*; Suemasu, Takashi*
Journal of Physics and Chemistry of Solids, 175, p.111199_1 - 111199_8, 2023/04
Times Cited Count：1 Percentile：15.7(Chemistry, Multidisciplinary)Collaborative Laboratories for Advanced Decommissioning Science; Tokyo Institute of Technology*
JAEA-Review 2022-053, 89 Pages, 2023/02
JAEA-Review-2022-053.pdf:3.47MB
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2021, this report summarizes the research results of the "Uncertainty reduction of the FPs transport mechanism and debris degradation behavior and evaluation of the reactor contamination of debris state on the basis of the accident progression scenario of Fukushima Daiichi Nuclear Power Station Unit 2 and 3" conducted in FY2021. The present study aims to elucidate the cause of the high dosage under shield plug by clarification of to the cesium behavior of migration, adhesion to structure and deposition as well as evaluate the properties of metal-rich debris predeceasing melted through the materials science approach based on the most probable scenario of accident progression of Unit 2 and 3. In this fiscal year, the followings were achieved.
Iwase, Hiroki*; Akamatsu, Masaaki*; Inamura, Yasuhiro; Sakaguchi, Yoshifumi*; Morikawa, Toshiaki*; Kasai, Satoshi*; Ouchi, Keiichi*; Kobayashi, Kazuki*; Sakai, Hideki*
Journal of Applied Crystallography, 56(1), p.110 - 115, 2023/02
Times Cited Count：2 Percentile：85.44(Chemistry, Multidisciplinary)With the increasing importance of light-responsive materials, it is vital to analyze the relationship between function and structural changes induced by light irradiation. Small-angle scattering (SAS) is effective for such structural analysis. However, quantitatively capturing local molecular structure formation and molecular reactions at a scale of less than 1 nm via SAS is difficult. In this study, to analyze the structure of non-equilibrium phenomena in light-responsive materials, a new sample environment has been developed for a time-of-flight small- and wide-angle neutron scattering instrument (TAIKAN), comprising a UV-Vis irradiation system, UV-Vis absorption measurement equipment and photodetector. Simultaneous measurement of small-angle neutron scattering and UV-Vis absorption was achieved. This system was used to demonstrate the in situ observation of UV-Vis irradiation-induced structural change of micelles formed by a light-responsive surfactant sample in an aqueous solution.
Onutai, S.; Osugi, Takeshi; Sone, Tomoyuki
Materials, 16(3), p.985_1 - 985_14, 2023/02
Times Cited Count：4 Percentile：90.35(Chemistry, Physical)Collaborative Laboratories for Advanced Decommissioning Science; Hokkaido University*
JAEA-Review 2022-050, 116 Pages, 2023/01
JAEA-Review-2022-050.pdf:11.41MB
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2019, this report summarizes the research results of the "Safe, efficient cementation of challenging radioactive wastes using alkali activated materials with high-flowability and high-anion retention capacity" conducted from FY2019 to FY2021. Since the final year of this proposal was FY2021, the results for three fiscal years were summarized. The present study aims to explore alkali activated materials with high anionic nuclide retention and flowability and their recipes for safe storage and disposal of iron flocculant from the water treatment facility at 1F, and to propose a design of a solidification device that is feasible as an actual plant. In order to achieve these objectives, the following five items were carried out in this study.
Teshigawara, Makoto; Ikeda, Yujiro*; Yan, M.*; Muramatsu, Kazuo*; Sutani, Koichi*; Fukuzumi, Masafumi*; Noda, Yohei*; Koizumi, Satoshi*; Saruta, Koichi; Otake, Yoshie*
Nanomaterials (Internet), 13(1), p.76_1 - 76_9, 2023/01
Times Cited Count：2 Percentile：54.89(Chemistry, Multidisciplinary)To enhance neutron intensity below cold neutrons, it is proposed that nanosized graphene aggregation could facilitate neutron coherent scattering under particle size conditions similar to nanodiamond. It might also be possible to use it in high neutron radiation conditions due to graphene's strong sp2 bonds. Using the RIKEN accelerator-driven compact neutron source and iMATERIA at J-PARC, we performed neutron measurement experiments, total neutron cross-section, and small-angle neutron scattering on nanosized graphene aggregation. The measured data revealed, for the first time, that nanosized graphene aggregation increased the total cross-sections and small-angle scattering in the cold neutron energy region, most likely due to coherent scattering, resulting in higher neutron intensities, similar to nanodiamond.
Center for Computational Science & e-Systems
JAEA-Evaluation 2022-004, 38 Pages, 2022/11
JAEA-Evaluation-2022-004.pdf:1.38MB
Research on advanced computational science for nuclear applications, based on "the plan to achieve the mid- and long-term goal of the Japan Atomic Energy Agency", has been performed by Center for Computational Science & e-Systems (CCSE), Japan Atomic Energy Agency. CCSE established a committee consisting of external experts and authorities which evaluates and advises toward the future research and development. This report summarizes the results of the R&D performed by CCSE in FY2021 (April 1st, 2021 - March 31st, 2022) and their evaluation by the committee.
Center for Computational Science & e-Systems
JAEA-Evaluation 2022-003, 61 Pages, 2022/11
JAEA-Evaluation-2022-003.pdf:1.42MB
JAEA-Evaluation-2022-003-appendix(CD-ROM).zip:6.16MB
Japan Atomic Energy Agency (hereinafter referred to as "JAEA") consults an assessment committee, "Evaluation Committee of Research Activities for Computational Science and Technology Research" (hereinafter referred to as "Committee") for result and in-advance evaluation of "Computational Science and Technology Research", in accordance with "General Guideline for the Evaluation of Government Research and Development (R&D) Activities" by Cabinet Office, Government of Japan, "Guideline for Evaluation of R&D in Ministry of Education, Culture, Sports, Science and Technology" and "Regulation on Conduct for Evaluation of R&D Activities" by the JAEA. In response to the JAEA's request, the Committee assessed the research program of the Center for Computational Science and e-Systems (hereinafter referred to as "CCSE"). The Committee evaluated the management and research activities of the CCSE based on explanatory documents prepared by the CCSE, and oral presentations with questions-and answers.
Yamashita, Kiyoto; Yokoyama, Aya*; Takagai, Yoshitaka*; Maki, Shota; Yokosuka, Kazuhiro; Fukui, Masahiro; Iemura, Keisuke
JAEA-Technology 2022-020, 106 Pages, 2022/10
JAEA-Technology-2022-020.pdf:4.77MB
Radioactive solid wastes generated by Fukushima Daiichi Nuclear Power Station disaster may contain high levels of salt from the tsunami and seawater deliberately released into the area. It is assumed that polyvinyl chloride (PVC) products may be used for decommissioning work and for containment of radioactive wastes in the future. Among the method of handling them, incineration is one method that needs to be investigated as it is good method for reduction and stabilization of wastes. But in order to dispose of Trans-Uranic (TRU) solid waste containing chlorides, it is necessary to select the structure and materials of the facility based on the information such as the movement of nuclides and chlorides in the waste gas treating system and the corrosion of equipment due to chlorides. Therefore, we decided to get various data necessary to design a study of the incineration facilities. And we decided to examine the transfer behavior of chlorides to the waste gas treatment system, the corrosion-resistance of materials in the incineration facilities, and the distribution survey of plutonium in them obtained using the Plutonium-contaminated Waste Treatment Facility (PWTF), Nuclear Fuel Cycle Engineering Laboratories, which is a unique incinerating facility in Japan. This report describes the transfer behavior of chlorides in the waste gas treatment system, the evaluation of corrosion-resistance materials and the distribution survey of plutonium in the incineration facilities obtained by these tests using the Plutonium-contaminated Waste Treatment Facility, Nuclear Fuel Cycle Engineering Laboratories.
Nauchi, Yasushi*; Nomi, Takayoshi; Suzuki, Risa; Kosuge, Yoshihiro*; Shiba, Tomooki; Takada, Akira*; Kaburagi, Masaaki; Okumura, Keisuke
Proceedings of International Topical Workshop on Fukushima Decommissioning Research (FDR2022) (Internet), 4 Pages, 2022/10
Kato, Shinya; Matsuba, Kenichi; Kamiyama, Kenji; Akaev, A.*; Vurim, A.*; Baklanov, V.*
Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 12 Pages, 2022/09
The In-Vessel Retention (IVR) of molten-core in Core Disruptive Accidents (CDAs) is of prime importance in enhancing the safety of sodium-cooled fast reactors. One of the main subjects in ensuring IVR is to design the Control Rod Guide Tube (CRGT) which allows effective discharge of molten core materials from the core region. The effectiveness of the CRGT design is assessed through CDA analyses, and it is reasonable for these analyses to develop a computer code collaborated with experimental researches. Thus, experiments addressing the discharge behavior of the molten-core materials through the CRGT have proceeded as one of the subjects in the collaboration research named the EAGLE-3 project, and the obtained experimental results are reflected in the development of the SIMMER code. In this project, a series of out-of-pile tests using molten-alumina as the fuel simulant was conducted to understand the discharge behavior of molten-core materials through the CRGT. In this study, in order to investigate the effect of an internal structure in the CRGT on the discharge behavior of the molten-core materials, the data of an out-of-pile test in which the molten-alumina penetrated to a duct with the internal structure were analyzed. In addition, the post-test analysis using the SIMMER code was conducted and the results were compared with the test results.
Matsushita, Hatsuki*; Kobayashi, Ren*; Sakai, Takaaki*; Kato, Shinya; Matsuba, Kenichi; Kamiyama, Kenji
Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 9 Pages, 2022/09
During core disruptive accidents in sodium-cooled fast reactors, the molten core material flows through flow channels, such as the control rod guide tubes, into the core inlet plenum under the core region. The molten core material can be cooled and solidified while impinging on a horizontal plate of the inlet plenum in a sodium coolant. However, the solidification and cooling behaviors of molten core materials impinged on a horizontal structure have not been sufficiently studied thus far. Notably, this is an important phenomenon that needs to be elucidated from the perspective of improving the safety of sodium-cooled fast reactors. Accordingly, a series of experiments on discharging a simulated molten core material (alumina: AlO
) into a sodium coolant on a horizontal structure was conducted at the experimental facility of the National Nuclear Center of the Republic of Kazakhstan. In this study, analyses on the sodium experiments using SIMMER-III as the fast reactor safety evaluation code were performed. The analysis methods were validated by comparing the results and experiment data. In addition, the cooling and solidification behaviors during jet impingement were evaluated. The results indicated that the molten core material exhibited fragmentation owing to the impingement on the horizontal plate and was, therefore, scattered toward the periphery. Furthermore, the simulated molten core material was evaluated to be cooled by sodium and subsequently solidified.
